LA MICRO BLOG
anything and everything microblading
11 tips and tricks for beginning microblading artists
Hey ladies and gents!
This micro blog was made for anyone who wants to gain more insight into making their microblading craft better!
Here are a few things I do to make sure I am producing the best eyebrows for each individual client.
Lets dive in!
Tip 1.
Three point stretch
TIP: Pull tight with a three point stretch. That is where you use your thumb and pointer finger from the hand not microblading and pull with your pinky with the hand microblading.
RESULT: Cleaner, crisper lines.
Photo: Selena Dailey
Tip 2.
Make strokes without pigment on your blade
TIP: Microblade strokes on your first or second pass with no pigment on your blade. Add pigment after your stroke with a microbrush.
RESULT: You can see the skin open up more than if you have pigment in the way. Try it on one stroke and u'll see what I mean.
Photo: Selena Dailey
Tip 3.
Microblade front strokes last
TIP: Microblade front strokes last, start your first pass about four strokes from the front of the outline or the tail. Whatever works for you. I make my surgical dots in the front about 2 hair strokes away from my outline (SEE TIP 10 FOR PIC.) Not everyone wants their brows to be as close as the middle of their nostril. I then at the end have the client and I decide if each eyebrow needs an extra stroke in the front. I do one stroke on the right, then one stroke on the left. Then have the client decide if they want another stroke.
RESULT: Clients are so much happier and satisfied with their brows! other artists just give whatever brows they think would look best on the client. But, so far in my experience, clients love and appreciate this extra step.
Photo: Selena Dailey
Tip 4.
Use more than one blade
TIP: Use more then one blade. I use a Classic 9 by Tina Davies Professional on the first pass then the U Blade to do the second pass. The U blade allows more of a free flow when it comes to going over strokes for the second pass. The Classic 9 for me is great for the first stroke, crisper lines.
RESULT: Better lines after the second or third pass.
Photo: Tina Davies
Tip 5.
Magnification and head lamp
TIP: Use a magnifying head lamp. If you wear glasses every minute of the waking day like me you will need a magnifier for sure! This allows me to see all the nooks and crannies of the skin.
RESULT: Prevents you from crossing your hair strokes, you don't start to high or low from other strokes. Precision is key. Think of where the next stroke goes that will give you the look you want.
Photo: Selena Dailey
Tip 6.
Painting a pre-stroke
TIP: Paint a line of pigment on the skin where you are thinking of putting a hair stroke without opening the skin and then have the client see if they like that stroke.
I dip my blade into the pigment, I clean off one side of the blade on a cotton pad, I then make a thin line of where I can potentially put a stroke without opening the skin. Rather than over doing it in the front of the brow, have the client part of that decision process. It takes only an extra minute. So many of my clients are glad we didn't go closer in the front because that's where "the middle of the nostril is."
RESULT: Happy clients and no over done front strokes
Photo: Selena Dailey
Tip 7.
To bleed or not to bleed?
TIP: You don't have to make the skin bleed by going over strokes more than 2 or 3 times. Some artist only go over a stroke 2 times, not more. Tina Davies states, "as many times till you get the sweet spot."
Some people will bleed, that's just how it is (photo shows minor bleeding, normal.)
RESULT: Less scarring, pigment doesn't spread as much when healed.
Photo: Selena Dailey
Tip 8.
Use your classic 9 like a shader
TIP: Use your Classic 9 slanted microblade like a shader. Only have a few places that need some shading? Dont open up the shader, use your slanted Classic 9 like a shader. Works everytime!
RESULT: Direct shading for tiny areas like the tail. Some times the tail is thinner than the shader.
Photo: Selena Dailey
Tip 9.
Where to start strokes?
Tip: You do not have to start microblading from the front. you can start from the tail. I personally jump around, I make a few hair strokes in the front on both brows, then I jump to the arch and make my way down the tail, then bottom of the tail, then meet the front strokes to the tail strokes.
Result: Personal preference. A balanced brow.
Photo: Selena Dailey
Tip 10.
Surgical dot placement
TIP: Make ur surgical dots INSIDE the outline. Then when you microblade, you will microblade the dots out. Start your surgical dots a few strokes from the front of the outline.
RESULT: Your client wont get stuck with blue dots when they leave with their new brows.
Photo: Selena Dailey
Tip 11.
Mapping
TIP: The most important one. Take your time with mapping. It takes me 20-45 mins just to get the perfect outline! Ask if they want a pointy or round arch? Have the client sit up, make sure the brows are even. Then lay them down, add your surgical dots, then after each first, second, third and final pass of microblading have them sit up to make sure they are even!
RESULT: Even and symmetrical brows.
Photo: Selena Dailey
Did this tip help you!?
Want to see more tips & tricks for better Microblading results?
Drop your info here and I will send you all of the great videos, tutorials and tips to getting better Microblading results that I put together!
Dont worry I dont give your info to anyone. No spam.
xoxo
Selena Dailey